Titebond GREENchoice Heavy Duty Construction Adhesive is a premium-grade formula designed for more demanding construction and repair projects. It provides strong grab, fills gaps and irregularities and will remain permanently flexible. This professional strength formula will bond to most common building materials. This VOC-compliant, nonflammable formula is environmentally safe – emitting no harmful fumes and promoting healthy living and working environments.
APPLICATION TEMPERATURE: 40°F to 100°F (5°C to 38°C)
SERVICE TEMPERATURE RANGE: 0°F to 120°F
WORKING TIME: Approximately 20 minutes for a 1/4″ bead
PREP: Surfaces must be clean and free of any material that may prevent adequate adhesion.
APPLICATION: Cut tip on slant for 1/4” to 3/8” bead. For subfloors, cut tip straight across. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 15 minutes or before skinning of adhesive occurs. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has dried. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
CLEANUP: Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
LIMITATIONS: Not designed for continuous submersion. Do not adhere one non-porous material to another since this will slow or prevent drying. Not recommended for use with mirrors.
